415
Kaleido-X
User’s Manual
The change is applied immediately. The Power Supply B Status indicator turns gray,
indicating that probing is disabled for this alarm.
Installing XEdit
The Kaleido-X Layout Editor (XEdit) is used to create layouts and configure the Kaleido-X.
When the computer with XEdit is connected to the Kaleido-X through a TCP/IP network,
you can use XEdit to modify layouts and settings directly on the Kaleido-X, or you can work
locally on the computer and then export your changes to the Kaleido-X.
See Creating Room
Layouts on page 203, for more information.
XEdit is not provided as a standalone application. You download the application to your
client PC or laptop directly from the multiviewer.
To install XEdit
1 From a workstation on the same subnet as the multiviewer, open a Web browser
window and type the IP address of the multiviewer in the address bar.
The Kaleido-X home page appears.
IMPORTANT
The system behavior after selecting or clearing the PSU B Installed
check box is as follows:
• When you select the PSU B Installed check box, the system
publishes a warning that PSU B has failed if there is no PSU in Slot
B. Do this when you have two PSUs installed in your frame.
• When you clear the PSU B Installed check box, the system does
not generate a warning that PSU B has failed if there is no PSU in
Slot B. Do this when you have only one PSU installed in your
frame.
Note: You can also download XEdit from Miranda’s support portal.
To Next Page
Loading...
