431
Kaleido-X
User’s Manual
For more information on the DXF-100 interface, refer to the DXF-100 DVI Fiber Optic Interface
User’s Manual (part no. M792-9500-101).
Servicing
Generating a System Snapshot
To generate a system snapshot
1 From a workstation on the same subnet, open a Web browser window and type the IP
address of the multiviewer in the address bar.
12
The Kaleido-X home page appears.
2Click the XAdmin button.
The XAdmin Status and Options page appears.
3Click the Technical support link in the navigation pane.
• As of Kaleido-X version 4.10, the EDID auto-detection feature is enabled by
default in order to facilitate the initial setup of a Kaleido-X system.
• Prior to Kaleido-X v. 3.00, EDID information was only reported for the
master KXO-Dual card. In more recent versions, every KXO-Dual/KXO-
Dual3 card reports the EDID information for its associated displays.
Notes (continued)
12.The multiviewer must have Kaleido-X software version 2.10 or later.
Firefox users:
If you see a security warning instead of the home page, then refer to
Registering your Multiviewer's Security Credentials with your Browser, on
page 421.
Internet Explorer and Chrome users:
• If the page remains blank, then refer to Enabling the Compatibility View in
Internet Explorer 10, on page 429.
• If you see a certificate error message instead of the Status and Options
page, then refer to
Registering your Multiviewer's Security Credentials
with your Browser, on page 421.
To Next Page
Loading...
