439
Kaleido-X
User’s Manual
6Click OK.
The XAdmin Status and Options page appears.
Restarting a Kaleido-IP Multiviewer
To restart a Kaleido-IP multiviewer
1 From a workstation on the same subnet, open a Web browser window and type the IP
address of the multiviewer in the address bar.
The Kaleido-X home page appears.
2 Click the XAdmin button.
The XAdmin Status and Options page appears.
3Click the Restart / Shut down link in the navigation pane.
The Restart / Shut down page appears.
4Click Restart unit.
Firefox users:
If you see a security warning instead of the home page, then refer to
Registering your Multiviewer's Security Credentials with your Browser, on
page 421.
Internet Explorer and Chrome users:
• If the page remains blank, then refer to Enabling the Compatibility View in
Internet Explorer 10, on page 429.
• If you see a certificate error message instead of the Status and Options
page, then refer to
Registering your Multiviewer's Security Credentials
with your Browser, on page 421.
To Next Page
Loading...
