40
Operation of the Monitor Wall
Displaying Subtitles and Closed Caption Text
Displaying Subtitles and Closed Caption Text
Setting the Text Mode
To change the text mode for a video monitor
1 Right-click the appropriate video monitor on the monitor wall.
2 If the current text mode indicator is Text (CC/subtitling), then click Enable text on the
shortcut menu, to first enable the display of subtitles and closed captions, and then
right-click the video monitor again.
3 On the shortcut menu, point to the text mode indicator —either Text (CC/subtitling),
CC
(608), CC (708), DVB subtitling, or Teletext & subtitling, then point to Text mode,
and click the text mode you wish to apply.
Notes
• The KMV-3901/3911 does not support extraction of subtitles and closed
captions.
• Only the Kaleido-IP supports extraction of DVB subtitles.
• The Kaleido-IP supports extraction of CEA-608 and CEA-708 closed
captions, in addition to DVB subtitles.
To Next Page
Loading...
