42
Operation of the Monitor Wall
Displaying Subtitles and Closed Caption Text
Setting the DVB Subtitling Language from the Monitor Wall
To set the decoded DVB subtitling language for a monitor on the wall
• Right-click the appropriate composite, video, or subtitling monitor, point to DVB
subtitling, and then click the language you wish to monitor.
To switch DVB subtitling off
• Right-click the monitor, point to DVB subtitling, and then click Off.
Selecting a Teletext/Subtitling Page from the Monitor Wall
To change the decoded teletext/subtitling page for a composite or video monitor
• Right-click the monitor, point to Teletext & Subtitling, and then click Page A ([page
number]) on the shortcut menu.
Note: The shortcut menu displays Service 1 to Service 6. Use the Extended
services sub-menu to select from the Service
7 to Service 63 range. When
an extended service is enabled it is added to the shortcut menu below
Service 6.
Note: When monitoring a program that includes DVB subtitling based on a
non-supported version of ETSI EN 300
743, the Kaleido-IP raises the DVB
subtitle invalid alarm and no subtitling appears on the monitor wall.
To Next Page
Loading...
