44
Operation of the Monitor Wall
Selecting an Input Method
Selecting an Input Method
To select an input method
1 Click the appropriate composite or video monitor on the monitor wall.
2Press left Alt+Shift+1 on the external keyboard.
The Select Input Method menu appears.
3On the Select Input Method menu, click the appropriate input method.
You can now type text in your language of choice, using an external keyboard
connected to the Kaleido-RCP2.
Assigning Sources to Monitors
Any monitor in a layout can be assigned a logical source in XEdit. It is possible to change
the logical source assignment directly on the monitor wall.
Assigning a Logical Source to a Monitor by Using the Kaleido-RCP2
To assign a logical source to a monitor, by using the Kaleido-RCP2’s CHANNEL button
1 Move the pointer over the monitor that is to be assigned a logical source, and then
press CHANNEL on the Kaleido-RCP2.
The Assign Source window appears.
Note: In the case of a KMV-3901/3911 multiviewer, the current version of
the Kaleido-X software does not support input methods on the monitor
wall. As a workaround, you can use XEdit, open the layout that contains the
text you wish to modify (e.g. static UMD text, logical source text level), and
then use the appropriate input method from your client PC or laptop.
Note: Logical source assignments can also be changed by configuring
actions in XEdit.
See Creating Actions on page 267 for more information.
To Next Page
Loading...
