57
Kaleido-X
User’s Manual
• press AUDIO MONITORING on the Kaleido-RCP2
• press the AUDIO MONITOR programmable knob on the RCP-200
This will route the specific audio level associated with the video monitor, based on the
assigned logical source.
• Move the pointer over any other monitor, and then
•click the monitor
• press AUDIO MONITORING on the Kaleido-RCP2
• press the AUDIO MONITOR programmable knob on the RCP-200
This will route the first audio level of the associated logical source to the monitoring
output.
Audio monitors that have an audio monitoring indicator (see Configuring Audio
Monitors, on page 227) and that are currently assigned the same audio level, will turn
the color associated with the current display (see Calibrating the Audio Monitoring
Color, on page 120), showing that someone is listening at this specific display.
If multiple users are listening to the same audio source at the same time, then the
indicator will show one color only: (1) the color associated with a display in the same
room (2) the color associated with the display at the monitoring output that was
enabled last in the room.
Controlling the Audio Monitoring Volume from the Kaleido-RCP2
• Adjust the audio volume for your assigned monitoring output by using the up and
down volume buttons on the Kaleido-RCP2.
• Mute the audio by pressing the Mute button on the Kaleido-RCP2.
• Attenuate the volume by 20 dB by pressing the -20 dB button on the Kaleido-RCP2.
Controlling the Audio Monitoring Volume from the RCP-200
Pressing the VOL knob repeatedly alternates between the normal, mute, and -20 dB audio
output mode.
• Adjust the audio volume for your assigned monitoring output by rotating the VOL
knob.
• Mute the audio by pressing the VOL knob until MUTE appears above the knob.
• Attenuate the volume by 20 dB by pressing the VOL knob until -20 dB appears above
the knob.
Audio monitoring indicator
To Next Page
Loading...
