70
Managing Kaleido-X Systems
Importing a Database
Access control is now enabled for this multiviewer.
Disabling Access Control
To disable access control
1 Connect to the multiviewer you wish to unprotect (see Connecting to a Multiviewer, on
page 67).
XEdit prompts you for a password.
2 Type the password associated with the RCP user Admin, and then click Log on.
3On the Configure menu, click Access control.
Access control is now disabled for this multiviewer.
Importing a Database
To import a database
1On the Configure menu, point to Database, and then click Import.
A window appears, prompting you for the IP address of the multiviewer whose
database you wish to import.
To Next Page
Loading...
