Lenses can be interchanged regardless of whether the film is advanced or not. Moreover, it
makes no difference what aperture value the lenses may have been set at the time of changing.
For Miranda interchangeable lenses not belonging to the exclusive Auto-Miranda Series, such as
Soligor or other preset lenses, the inside screw mount can be used. Also various adapters and
accessories can be attached by using either the bayonet or the screw mounts.
Detaching the Lens
While pressing the lens lock lever on the side of the lens barrel,
turn the lens counterclockwise l/8 of a full turn. When the red dot
on the barrel stops at the red line on the camera body, the lens
comes off easily.
When attaching or detaching the lens, it is advisable to have the
camera facing up on one's lap or other manageable place to assure
safe and correct handling.
· When changing the lens, take care not to let direct light enter the
camera body.
Attaching the Lens
Match the red dot of the lens barrel with the red line on the body, fit the lens tightly
and turn it clockwise l/8 of a full turn. It will then click into position with the red dot
exactly in the center.
· Be careful not to hold the helical portion of the lens (focusing ring section in front)
when mounting the lens as the focusing mechanism may be damaged.
MIRANDA INTERCHANGEABLE LENSES--
To Next Page
