Mircom TX3 Series - Configuration Menu Using the Entry Panel Keypad; Figure 10. Changing Your Passcode

Configuration
Version 1.1 Telephone Access System User Guide 21 (42)
LT-968 Copyright 2012
To change your passcode
Figure 10. Changing Your Passcode
You have successfully changed your passcode for one access level. The display
now returns to the configuration menu.
2.15 Configuration Menu using the Entry Panel Keypad
The Configuration Menu contains the database menu. The Database Menu lets
you add, edit and delete resident records, and consists of the following options:
• Add Record
• Edit Record
• Delete Record
• Sort by name
• Sort by d-code (sort by dial code)
• Auto program
• Delete all record
1. Press (scroll up) or (scroll down) to
find “Change Passcode”.
2. Press when the arrow is beside “Change
Passcode”. The display enters Change Passcode
setup.
3. Use the up down arrows to see all of the access
levels.
4. Press to select and continue.
5. Enter your new password for the access level you
have chosen. It must consist of at least four digits
up to a 10 digit maximum of 9999999999.
6. You will be asked to re-enter new passcode.
7. Press to save and continue.
7. Correlation
8. Change Passcode <
Enter Access Level
< 001>
Enter New Passcode
[ 3333 ]
Re-enter Passcode
[ 3333 ]