Mircom TX3 Series - Page 21

Configuration
Version 2.7 TX3 Telephone Access System Programming Manual 21
LT-979 Copyright 2018
To select a language
1. Press the arrow key to scroll to “Language” and press the telephone (enter)
key. The language selection appears.
2. Press the info key to return to the previous menu.
2.7.9 Welcome Message
The Welcome Message function lets you change the welcome message on the
front of the TX3 Entry Control Panel.
To change the welcome message
1. Press the arrow key to scroll to “Welcome Message” and press the
telephone (enter) key. The welcome message appears.
2. Press the up arrow key to scroll to the next message line (Line-2) and scroll
up again for next message (Line-3).
3. Edit each message.
Press the 1 key 9 times to get an asterisk (*).
4. Press the telephone (enter) key to accept.
5. Press info key to return to previous menu.
2.7.10 Guard Phone
The Guard phone is an optional auxiliary phone on the lobby control unit that lets
you place calls to residents using their dial code.
Language
[ x ] English
[ ] French
[ ] Spanish
Enter Msg Line - 1
MIRCOM TX3 #1