EasyManua.ls Logo

Mircom TX3-TOUCH-F15-B - Figure 55 Fitting the Kiosk on the Base Plate; Figure 56 Fitting the Kiosk on the Base Plate (from Below)

Mircom TX3-TOUCH-F15-B
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation
TX3 Touch Screen Installation Manual 65
To fit the Touch Screen Kiosk on the base plate
1. Fit the back lip of the Kiosk into the notches in the base plate, and tilt the
Kiosk forwards so that it rests on top of the base plate.
Figure 55. Fitting the Kiosk on the base plate
Figure 56. Fitting the Kiosk on the base plate (from below)

Table of Contents

Related product manuals