EasyManua.ls Logo

Mircom TX3-TOUCH-F15-B - 3 Touch Screen System and Setup

Mircom TX3-TOUCH-F15-B
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
70 TX3 Touch Screen Installation Manual
3 Touch Screen System and Setup
This chapter describes the basic Touch Screen system, main panel, controller
board components and provides information about its operation and setup.
This chapter explains
Installation Prerequisites
Touch Screen System
TX3-TOUCH-K15-A, TX3-TOUCH-F15-A, TX3-TOUCH-S15-A
Main Panel, Boards, and Grounding
TX3-TOUCH-F15-B/C/D and TX3-TOUCH-S15-B/C/D Inside Door,
Boards, and Grounding
TX3-TOUCH-F22(-C/D) and TX3-TOUCH-S22(-C/D) Inside Door,
Boards, and Grounding
TX3-TOUCH-S15B-WR and TX3-TOUCH-S15S-WR Inside Door,
Boards, and Grounding
Lobby Controller Board
Connecting to the External Power Supply
Turning the Touch Screen On and Off
Installing the Postal Lock on TX3 Touch Indoor Units
Installing the Telephone Lines
•Ethernet
Beginning Configuration
Installing Other Optional and Replacement Components
RS-485
Installing the P1264 IP camera
Replacing the Display on the 22” Touch Screen
Installing the Optional TX3-DELTA5 Card Reader

Table of Contents

Related product manuals