Chapter 5 Setting Up the Unit
• Press the CLR/TEST key; the flashing
display will show the selected (H or L)
alarm threshold setting.
• If the optional Vibrator Alarm has been
activated, the display will alternate
between the threshold value and a
vertically scrolling horizontal bar
(– – –).
Changing the Dose Alarm Indicators
To change the High level (H) or Low level (L)
alarm indicator settings:
• Press the ALARM and DOSE keys.
• You’ll see an H, for High Level Alarm,
displayed.
• To change the Low Level indicators,
press the DOSE key again; the display
will show an L.
• Press the CLR/TEST key to access the
selected (H or L) indicators.
• Repeatedly press the ALARM key until
you see the desired combination of
indicators, AUDio, VISual, vibrator
(– – –), or no indicators.
38
To Next Page
Loading...
