B. Default Alarm Settings
The Dose and Rate alarm settings (thresholds)
for the UltraRadiac-Plus are factory set to the
values in the following tables.
R Low Setting High Setting
Rate 500 µR/hr 2 R/hr
Dose 100 mR 10 R
Sv Low Setting High Setting
Rate 1 mSv/hr 100 mSv/hr
Dose 1 mSv 100 mSv
The factory settings can be changed manually
(refer to the chapter Setting Up the Unit on
page 28), or via the optional Model S900
UltraRadiac Setup Software.
CAUTION:
The System Administrator is
responsible for determining
and setting the proper
operational alarm thresholds
for each UltraRadiac-Plus.
65
To Next Page
Loading...
