EasyManua.ls Logo

MITACA I9 - Page 26

MITACA I9
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Problem
Solution
19
24
No beverage comes
out when the coffee
dispensing button
(A-B) is pressed.
1) Fill the tank with water
2) Check if the water tank is well located
3) Discharge air by lifting the lever, remove the
capsule and close the lever. Wait a few seconds
for the pump to cool down.
Press the beverage dispensing button (A-B)
The capsule is not
ejected
Close the lever (1), then slowly open it again
Press the dispensing button (A-B) and slowly open the lever (1) while
the water is being dispensed.
The lever (1) will not
slide properly
Press the dispensing button (A-B) and slowly close the lever (1) several
times while the water is being dispensed.
4) Empty the capsule receptacle and reset the
coffee function: turn the machine off and on
again switching the main switch (9) off and on

Related product manuals