Turn on the DigiFlex™ Meter.
With thumb and forefinger near the weight, pull the
shaft HORIZONTALLY toward you approximately 3
inches. See image 11-3. Release the club so it oscillates
HORIZONTALLY over the DigiFlex™ Meter. Press and
release the Reset Button with the other hand. Do
not oscillate the shaft vertically. The result will be an
incorrect CPM reading. See image 11-4.
The CPM frequency will be displayed in the Digital
Readout.
image 11-3
image 11-4
Repeat STEP 6 to confirm CPM frequency reading.
To Next Page
Loading...