To Next Page
T
Timothy WelchAug 5, 2025
What to do if MiTEC Industrial Equipment fails performance test?
- JJacqueline WhitakerAug 5, 2025
If the MiTEC Industrial Equipment fails the performance test, you should: * Check the power source. * Check the RF source, cabling, and connectors. * Inspect for a clogged fan and any debris within the heat-sink fins; clean these components thoroughly. If the fan is worn, replace it. If these steps do not resolve the issue, the transmitter module may be defective and should be returned to Mitec.
General