Mitox 280BVX - Routine Maintenance (Continued)

280BVX Blower/Vacuum
17
Original Instructions Version July 15
5.8.2 Restarting work
When you wish to start using the machine again:
– Replace the spark plug cap.
– Prepare the machine as indicated in the paragraph entitled “Preparing for work”.
The following intervals apply to normal operating
conditions only. If your daily working time is longer
or operating conditions are dicult (very dusty
work area, etc.), shorten the specified intervals
accordingly.
Before starting working After finishing work daily After each refueling stop Weekly Monthly Every 12 months If problem If damaged If required
Complete
machine
Visual inspection (condition,
wear, leaks) * *
Clean
*
Control Handle Check operation * *
Air filter Clean * * *
Replace * *
Filter in fuel tank Check *
Replace filter * * *
Carburrettor Check idle setting * *
Readjust idle *
Spark plug Readjust electrode gap *
Replace after 100 hours of
operation
Cooling inlets Clean *
All accessible
screws
Check *
Retighten *
Anti-vibration
elements
Check * * *
Replace1) *
Safety labels Replace *
Muer Clean1) *
1) MITOX recommends that this work be done by a MITOX servicing dealer.
Use only the spare parts recommended by MITOX.