Mitsubishi Electric a2 Series - Page 145

α 2 Simple Application Controllers
Function Blocks 6
6 - 91
4 ) Return to the function block edit screen. Using the “Up and Down” keys to highlight the
Setup FB and press the “OK” key.
5 ) Highlight DelayTime from the list of options and press the “OK” key. The Delay Time can
be entered using the “ , , + and -” keys.
6 ) Highlight OneShot from the list of options and press the “OK” key to enter times. The One
Shot Time can be entered using the “ , , + and -” keys.
7 ) Highlight Condition from the list of options and press the “OK” key to enter either a
RiseEdge or a FallEdge for the Delayed One Shot Operation.
8 ) Press the “OK” key to accept and use the “ESC” key to return to the FBd.
De l yT mie
OneSh to
B001 :D SO
Cond i itno
a
De l ay itme
.01s
t= .00s
B001 :D SO
T=
One sh to
.01s
t= .01s
T=
B001 :D SO
Ri seE gd
B001 :D SO
Cond i itno
e
Fa l l E gde