Mitsubishi Electric a2 Series - Page 172

α 2 Simple Application Controllers
Appendix 8
8 - 8
Note:
1 ) Number of bytes used = 19 + 1
∗
(Characters in equation)
2 ) Number of bytes used = 8 + 4
∗
(Number of time switches)
3 ) Number of bytes used = 30 + 1
∗
(Characters in equation)
4 ) Number of bytes used is decided by the displayed item.
5 ) Number of bytes used = 32 + 3
∗
(Number of screen)
6 ) Number of bytes used = 12 + 1
∗
(Characters in E-Mail address)
Control
Display
[CDP]
The Control Display Function allows the
user to control the LCD image screens. The
function block can only be set in
AL-PCS/WIN-E software for Alpha Series
Controllers. When control bit N04 is ON, it
is possible to control the displayed User
Screen.
*5 6.35
Connect
[ _B ]
The Connect function block is an internal
device used to show the memory used by
input bits, system bits, AS-interface bits,
and the operation keys. No function block
appears on screen or is shown as being
used in the “Memory Configuration Usage”
dialog box. The purpose is only to calculate
the memory that is used by the bits listed
above.
10 Btye 6.36
System
Outputs
Control for external devices through relays
and transistors.
10 Btye -
Displayed Item
Number of bytes,
α
2
Series
Characters 16 + 1
×
(Each character displayed)
Analog, FB value
Value 17
Graph 23
Time, Date 14
Time Switch 17
FB Name FB Symbol Description of Function Block
Memory
Use
Section
00
B_
OI
0