Mitsubishi Electric AE-C400 - 16-1-3.Sub Menu Tab: Basic System

16. Initial settings - Basic settings/operation
152
WT09991X01
16-1-3. Sub menu tab: Basic System
Configure settings for the AE-C/EW-C.
Tapping [Basic Settings] - [Basic System] will display the Basic System Settings screen.
(C)
(D)
(E)
(B)
(A)
Item Function and description
(A)
Target centralized
controller
The number and the name of the AE-C/EW-C controller that has been registered
on the Connection tab are displayed.
(B) Unit Settings
Set the name and unit ID of the target AE-C/EW-C controller.
Name: Enter the site name, building name, floor number, etc. (Up to 40 characters)
Unit ID: Enter any number. (Six digits)
(C)
System Configuration
Settings
Configure settings such as the M-NET address and external input/output method
for the AE-C/EW-C controller.
(D) Display Format Set the items related to the display format of the AE-C/EW-C controller.
(E) [Save]/[Back]
After completing the setting, tap [Save].
To cancel the setting, tap [Back].
WT09991X01 英語IB詳細編 (3校 正式版).book 152 ページ ２０２４年７月３０日 火曜日 午後３時３４分