7 FUNCTIONS
7.2 Reserved Station Specification
33
7
7.2 Reserved Station Specification
This functions reserves a station (a station not actually connected but counted as a connected station) for future use. A
reserved station is not detected as a faulty station even though it is not actually connected.
*1 The station is not actually connected.
A reserved station is also included in the refresh range.
Setting method
Specify a slave station as a reserved station in the network configuration settings. ( Page 35 Network Configuration
Settings)
Items such as the number of occupied stations and IP address can be set for a reserved station.
Master station
Slave station 3
*1
(reserved station)
Slave station 1 Slave station 2
To Next Page
Loading...
