Mitsubishi Electric CC-Link IE - Settings for the Master Station in MELSEC-Q;L; CC-Link IEF Basic Setting

8 PARAMETER SETTINGS
8.2 Settings for the Master Station in MELSEC-Q/L
41
8
8.2 Settings for the Master Station in MELSEC-Q/L
Settings for the master station in MELSEC-Q/L are set in GX Works2.
CC-Link IEF Basic Setting
This section describes how to configure whether to use CC-Link IE Field Network Basic and the settings of the refresh
parameters.
[Project window]  [Parameter]  [PLC Parameter]  [Built-in Ethernet Port Setting] tabs
After the setting above, the "CC-Link IEF Basic Setting window" displays when [CC-Link IEF Basic Setting] button is pressed.
Window
To display the "CC-Link IEF Basic Setting" window, set "IP Address", "Subnet
Mask Pattern", and "Default Router IP Address" in the "IP Address Setting"
window.