Mitsubishi Electric CR800-D Series - Robot (system) Status Variables; Power ON Time

Robot (system) status variables 102
13.2.2. Operating information
M_PowOnTime: Power ON time
[Function]
Returns the cumulative time of power supply ON of robot controller from a last overhaul. [hour]
[Format]
Example) <Numeric variable> = M_PowOnTime
[Terminology]
<Numeric variable> Specify the numeric variable to assign.
[Sample]
1 M1 = M_PowOnTime 'The cumulative time of power ON of the robot controller is set in M1.
[Explanation]
(1) Returns the cumulative time of power ON of the robot controller.
The cumulative time is the time from when the previous overhaul was carried out.
(2) This variable is read only.
(3) Returns "-1" when the predictive/preventive maintenance function is disabled.