Mitsubishi Electric CR800-D Series - Predictive Maintenance Function Tree; Total Score Screen Overview; Consumption Degree Calculation Screen; Abnormality Detection Screen

Basic screen structure 48
4. Basic screen structure
This screen displays the status of reduction gear, the encoder, and battery (normal, warning, abnormalities),
and the total evaluation result of the consumption degree calculation function.
RT ToolBox3 project tree
1) Predictive Maintenance
(1) Total score
1) From the RT ToolBox3 project tree, when you double-click [Maintenance] - [Predictive
Maintenance], the predictive maintenance function starts and the Total Score screen appears.
2) In the Total Score screen, the predictive maintenance function tree is displayed on the left side and
the main screen on the right side.
3) When you click the + mark in the predictive maintenance function tree, menus of the predictive
maintenance function appear.
4) When you click an item on the predictive maintenance function tree, the main screen on the right
changes.
[Predictive Maintenance] is displayed under
[Maintenance] of the project tree.
When you click an item, the main screen
on the right side changes.
(2) Consumption degree calculation
(3) Abnormality detection
(4) Operating information
(5) Maintenance simulation
(6) Maintenance
(7) Setting
Main screen
Predictive maintenance
function tree