Mitsubishi Electric CR800 Series - Commands

3 Description of functions
3-45
3.5.7. Commands
The following section describes SLMP commands.
Refer to section 3.5.6
of this manual for details on message formats for other than the command sections.
 Request message format
(1) 3.5.6.1 Request Message
(2) Request data contains both commands and subcommands. Refer to section 3.5.7.2 onward in this manual for details.
 Response message format
 Normal completion
(1) 3.5.6.2 Response Message Format
(2) Refer to section 3.5.7.2 onward in this manual.
 Failed completion
Refer to section 3.5.6.2
onward in this manual.
Header
Subheader
Destina-
tion
network
No.
Destina-
tion
station
No.
Destination
unit I/O No.
Destina-
tion
multi
-
drop
station
No.
Request data
length
Monitoring
timer
Request data
Footer
Header
Subheader
Destina-
tion
network
No.
Destina-
tion
station
No.
Destination
unit I/O No.
Destina-
tion
multi
-
drop
station
No.
Response data
length
End code
Response data
Footer