99
[Add Variable] The variables to be monitored can be designated.
Input the variable in Variable Name, select the variable type, and then tap on the
[OK] button. (<h>)
[Change value] The value of the variable being watched now is changed. Variable identifier to which
the value is changed is double tapped or [Change value] button (<d>) is tapped while
selected. Variable value change window is displayed.
When the variable name is selected and the [Change value] button (<d>) is tapped on, the
window for making changes will appear.
(Location) (Integer, Float, String)
Please tap [OK] button (<i>) after changing the value. However, please note that the movement of the
robot might change by the change enough when you change the value.
To Next Page
Loading...
