Mitsubishi Electric CR800 Series - Power Reset of Robot Controller; Perform Power Reset

187
17.5. Find
Strings can be found from the parameter list being displayed.
Tap the [Find word] button, and enter the string you want to find in the find string field, and tap [Search] button.
(<a>)
The specified string is found from the current cursor position in the parameter list to the direction specified.
17.6. Power Reset of the Robot Controller
To make modified parameters effective, it is necessary to power on the robot controller again.
The power reset of the robot controller can be performed from T/B.
After setting parameters, the power reset confirmation screen appears.
To immediately reset the power, select [Yes]. (<a>)
To set more parameters, set all the necessary parameters first, and then select [Yes]. (<b>)
<a>
<a>
<b>