Mitsubishi Electric CR800 Series - Creating and Configuring Buttons

201
19.1.5.1. Button
(1) Tap the position (block) in which the button is made (<a>). Left side of the button is arranged in this
position.
(2) After "Select item" window is displayed, tap [Button] button (<b>).
(3) Set the button name, button size and the kind of button on "Create button" windows.
(4) The movement of when the button is tapped is set by [Set] button (<c>). The set content is displayed in
"Movement setting" (<d>).
(5) After the setting is completed, tap [OK] button (<e>).
<1> Name
:
The name of the button is set.
The button name can be input by [Button name edit] button.
The button name can be displayed by two lines by checking "2 lines".
<2> Size
:
The width of the button can be set.
The width of the button that can be set is 1/2/3.
<a>
<b>
<1>
<2>
<3>
<4>
<e>
<c>
<d>