Mitsubishi Electric CR800 Series - Collision Avoidance ON;OFF

23
9.13. Collision avoidance ON/OFF
If the collision avoidance function is can be used, [CAV] <a>combo box is displayed in the Jog operation screen.
Select [CAV] <a> combo box ON/OFF, The collision avoidance function when Jog is operated can be turned
ON/OFF. The collision avoidance function is available with Ver.3.0 or later of this software.
Moreover, the software version of the controller which can use this function is as follows.
Controller
S/W Ver. of the controller
CR750-D
-
CR750-Q
Ver.S3 or later
CR800-D/R
-
CR800-Q
Can be used with all versions
<a>