Mitsubishi Electric CR800 Series - Cut, Copy, and Paste Lines

44
11.1.9. Cut, Copy and Paste
The specified line of code can be cut, past or copy.
1) Select the line to cut or copy. Two or more lines can be selected. (<a>)
2) Tap the [Menu] button of the command edit screen, and if it move, tap the "Cut (Line)." (<b>) or if it
copies, tap the "Copy".
3) Select just before the line of paste (<c>), tap the [Menu] button of the command edit screen, and tap
"Past". (<d>)
<a>
<b>
<c>
<d>