Mitsubishi Electric CR800 Series - Jump to Line or Label

54
11.1.14. Jump
The program jumps to the designated label or line number. To carry out jumping, tap the [Jump] button.
1) Tap the "Jump" button (<a>) of the command edit screen. The setting screen will be displayed.
2) To input the label or line number, tap the [Edit] button (<b>), and uses the keyboard that displayed.
Tap the [Enter] key (<c>) of the keyboard to finish the input.
3) Tap the [OK] button (<d>) to jump to the specified line or label.
<a>
<b>
<c>
<d>