Mitsubishi Electric CR800 Series - Copy Position Data from USB to Controller

72
11.3.8. Copy position data for SQ Direct Function from USB to controller
1) Select the [USB] in the Program list screen, select the file of position data for SQ Direct Function (<a>) in the
list, and tap the [Copy/Move] button (<b>). The Copy/Move screen will appear.
The files of position data for SQ Direct Function are saved as extension “sdp”. By using the [File type] (<c>),
only the files of position data for SQ Direct Function can be displayed.
2) Confirm that the file of position data for SQ Direct Function in USB memory is selected in the [Source] list,
select the [Robot] (<d>) as the destination and tap the [Copy] button (<e>).
3) “Setting for copy” screen will appear.
Tap the [OK] button (<f>), the position data for SQ Direct Function in the USB memory is saved on the
controller.
The position data for SQ Direct Function in the USB memory cannot move to the controller. Please
copy to the controller and delete the file in the USB memory.
CAUTION
2)
<a>
<b>
<d>
<e>
<f>
1)
3)
<c>