9 Online Mode
There are two methods for evoking online editing; via the online menu or the toolbar icon. Use
Save as
in the
Project
menu to create a copy of the current project. Rename the Copy to
“Motor_Control_Mod”. The following operations will apply to this modified program.
Rebuild the project and download it to the PLC.
9.1 Online Change Mode
햲
Open the body of the ‘MOTOR_CONTROL’ POU and select
Online change mode
:
햳
Add an additional network as shown below:
Online Mode Online Change Mode
Training Manual GX IEC Developer 9 - 1
To Next Page
Loading...
