2.9.3 Positioning Modules
FX2N-1PG-E, FX2N-10PG
The positioning modules FX
2N-1PG-E and FX2N-10PG are extremely efficient single-axis posi
-
tioning modules for controlling either step drives or servo drives (by external regulator) with a
pulse chain.
FX
3U-20SSC-H
The SSCNET* module FX
3U-20SSC-H can be used in combination with a FX3U or FX3UC pro-
grammable controller to achieve a cost effective solution for high precision, high speed position-
ing. The plug-and-play fiber optic SSCNET cabling reduces setup time and increases control
distance for positioning operations in a wide range of applications.
*
SSCNET: Servo System Controller Network
Overview of Positioning Modules
쎲
The special function module can be used with a base unit or expansion unit of this series.
쑗
The special function module cannot be used with this series.
Extending for Special Functions The Hardware
2-24 MITSUBISHI ELECTRIC
2N
-10PG
FX
START
POWER
DOG
ERROR
X0
PGO
X1
FP
øA
RP
øB
CLR
They are very suitable for achieving accurate positioning
in combination with the MELSEC FX series. The configu
-
ration and allocation of the position data are carried out
directly via the PLC program.
The FX
2N-1PG-E provides an 100 kHz open collector out
-
put while the FX
2N-10PG is equipped with a 1 MHz
differential line driver output.
A very wide range of manual and automatic functions are
available to the user.
X READ
Y
Y
R
EADY
XER
ROR
Y ERROR
POWER
START
DOG
INT 0
INT 1
A
B
INT 0
INT 1
A
B
FX2
CU
-20SSC-H
Servo parameters and positioning information for the
FX
3U-20SSC-H are easily set up with an FX3U or FX3UC
base unit and a personal computer. For parameter setting,
monitoring and testing the easy programming software FX
Configurator-FP is available.
Module type Designation Description FX1S FX1N
FX2N
FX2NC
FX3G
FX3U
FX3UC
Special function modules
FX2N-1PG-E
Pulse output for inde
-
pendent 1-axis control
쑗쑗쎲쑗쎲
FX
2N-10PG
FX3U-20SSC-H
Simultaneous 2-axis
(independent 2-axis)
control (Applicable to
SSCNET III)
쑗쑗쑗쑗쎲
To Next Page
Loading...
