Mitsubishi Electric FX3U-1PG - 6.6 Operation Speed Change Function

6 Before Starting Positioning Operation
6.3 System Wiring
34
FX3U-1PG User's Manual
A connection example of interrupt input via PLC (BFM) is shown below.
Operation mode selection indicates the operation mode to be used. Interrupt signal indicates the signals used
in the given operation mode. INT0, INT1 is connected to X000, X001 of the FX
3U PLC.
• When interrupt input via PLC (BFM) is used
When interrupt input via PLC (BFM) is used, BFM#3 (b3=1, b2=1) and BFM#37 (b3=1, b2=1)
- In case of sink input
- In case of source input
Interrupt input 1
Interrupt input 0
External command
Interrupt stop
Operation mode selection Interrupt signal
STOP DOG
External command
FX3U PLC
X001X000
(INT0) (INT1)
24V S/S0V
FX3U-1PG
STOP DOGS/S
Interrupt 1-speed
Interrupt 2-speed
Interrupt 2-speed
Interrupt input 0
Interrupt input 0
Interrupt input 0
Interrupt input 1
Interrupt input 1
Interrupt input 0
External command
Interrupt stop
Operation mode selection Interrupt signal
STOP DOG
External command
FX3U PLC
X001X000
(INT0) (INT1)
0V S/S24V
FX3U-1PG
STOP DOGS/S
Interrupt 1-speed
Interrupt 2-speed
Interrupt 2-speed
Interrupt input 0
Interrupt input 0
Interrupt input 0
Interrupt input 1