from the high-speed output special adapter and the positioning special function unit/block to the servo motor
and stepping motor to properly control positioning operations.
PLC
Regarding wiring and installation of PLC:
Hardware manual
(The hardware manual is enclosed with the product.)
User's Manual - Hardware Edition
Regarding sequence program:
Programming manual
Enclosed with
the product
Separate
document
Separate
document
Regarding positioning function:
User's Manual- Positioning Control Edition
Separate
document
This document describes the built-in positioning function
setting method, examples of connection, examples of programs, details
for troubleshooting, etc.
This
document
Products needed for positioning
FX
3U
-2HSY-ADP
Special function unit/block
Regarding installation, parts names, operation, and programs:
USER'S MANUAL
This manual provides the
necessary information.
HARDWARE/PROGRAMMING MANUAL
This manual provides the necessary information.
Regarding installation and parts names:
INSTALLATION MANUAL
This manual provides the necessary information.
A separate document is needed for programming
details.
Enclosed with
the product
Either "INSTALLATION MANUAL" or "USER'S MANUAL" is
enclosed with each product.
For the details, refer to User's Manual [Positioning Control]
(this document) or the product manual.
Supplied with
the product
Separate
document
Separate
document
POWE
R
ERRO
R
F
P
PG
O
R
P
f
B
f
A
STAR
T
CL
R
DO
G
X
1
X
0
FX
2N
-10PG
Servo motor (stepping motor)
Obtain the instruction manual of the servo motor to be connected to your system.
This manual will be needed to set the parameters for the servo amplifier (drive
unit) or wire the servo amplifier.
FX3S/FX3G/FX3U Series
FX3S/FX3G/FX3GC/FX3U/FX3UC Series PLC
FX3GC/FX3UC Series