Mitsubishi Electric FX3U SERIES - Version Check; Version Upgrade History

1 Outline
B - 8
FX 3S /FX 3G /FX 3GC /FX 3U /FX 3UC PLC User's Manual - Positioning Control Edition
Built-in Positioning Functions
1.3 Version Numbers of Compatible PLCs
1.3.2 Version check
The PLC version can be checked by reading the last three digits of device D8001/D8101.
1.3.3 Version upgrade history
Compatible PLC
Compatible version
number
Date (month and year)
of production
Remarks
FX
3S PLC
Ver. 1.00 (initial product)
or later
After March 2013
FX
3G PLC
Ver. 1.00 (initial product)
or later
After June 2008
FX
3GC PLC
Ver. 1.40 (initial product)
or later
After January 2012
FX
3U PLC
Ver. 2.20 (initial product)
or later
After May 2005
Equivalent to FX
3UC PLC Ver. 2.20
Functions specified as "Ver. 2.20 or
later" in this manual are applicable.
FX
3UC PLC
Ver. 1.00 (initial product)
or later
After January 2004
Ver. 1.30 or later After August 2004
• DVIT instruction function is added.
- Designation of interrupt input
signal
Ver. 2.20 or later After May 2005
Functions specified as "Ver. 2.20 or
later" in this manual are applicable.
• TBL instruction is added.
- GX Works2/GX Developer can set
the positions using parameters.
• PLSV instruction function is added.
- Acceleration/deceleration function
• DVIT instruction function is added.
- User interruption mode
• DSZR, ZRN instruction functions are
added.
- Designation of destination for
CLEAR signal to be output
D8001/D8101
PLC type and
version
2 4 1 0 0
Version information (Example: Ver. 1.00)
PLC type (Example: 24 = FX
3U /FX 3UC PLC)
Downloaded from ManualsNet.com search engine