1 Outline
B - 9
FX
3S
/FX
3G
/FX
3GC
/FX
3U
/FX
3UC
PLC User's Manual - Positioning Control Edition
Built-in Positioning Functions
A
Common Items
B
Built-in
Positioning
Functions
Apx.
Example
Connection
1.4 Version Numbers of Compatible Programming Tools
1.4 Version Numbers of Compatible Programming Tools
Use a software version compatible with the used equipment version for programming.
1. GX Works2
1) GX Works2 English version (SWDNC-GXW2-E) is applicable to FX3S/FX3G/FX3GC/FX3U/FX3UC PLCs
from the following versions.
2) GX Works2 Japanese version (SWDNC-GXW2-J) is applicable to FX
3S/FX3G/FX3GC/FX3U/FX3UC
PLCs from the following versions.
2. GX Developer
1) GX Developer English version (SWD5C-GPPW-E) is applicable to FX3G/FX3U/FX3UC PLCs from the
following versions.
2) GX Developer Japanese version (SWD5C-GPPW-J) is applicable to FX
3G/FX3U/FX3UC PLCs from the
following versions.
Point:
• It is possible to create programs in FX
3GC PLC using programming tools of inapplicable versions by
selecting "FX
3G" as the alternative model.
• It is possible to create programs in FX
3S PLC using programming tools of inapplicable versions by
selecting "FX
3G" as the alternative model. However, memory capacity setting of the PLC parameter must
be set to 4000 steps or less.
Model name PLC version
Applicable GX Works2
version
Remarks
FX3S PLC
Ver. 1.00 or later Ver. 1.492N or later -
FX3G PLC
Ver. 1.00 or later Ver. 1.08J or later -
FX3GC PLC
Ver. 1.40 or later Ver. 1.77F or later -
FX3U PLC
Ver. 2.20 or later Ver. 1.08J or later -
FX3UC PLC
Ver. 1.00 or later Ver. 1.08J or later -
Model name PLC version
Applicable GX Works2
version
Remarks
FX3S PLC
Ver. 1.00 or later Ver. 1.492N or later -
FX3G PLC
Ver. 1.00 or later Ver. 1.07H or later -
FX3GC PLC
Ver. 1.40 or later Ver. 1.77F or later -
FX3U PLC
Ver. 2.20 or later Ver. 1.07H or later -
FX3UC PLC
Ver. 1.00 or later Ver. 1.07H or later -
Model name PLC version
Applicable
GX Developer version
Remarks
FX3G PLC
Ver. 1.00 or later Ver. 8.72A or later -
FX3U PLC
Ver. 2.20 or later Ver. 8.24A or later -
FX3UC PLC
Ver. 1.00 or later Ver. 8.18U or later -
Ver. 2.20 or later Ver. 8.24A or later
The built-in positioning setting was added
Model name PLC version
Applicable
GX Developer version
Remarks
FX3G PLC
Ver. 1.00 or later Ver. 8.72A or later -
FX3U PLC
Ver. 2.20 or later Ver. 8.23Z or later -
FX3UC PLC
Ver. 1.00 or later Ver. 8.13P or later -
Ver. 1.30 or later Ver. 8.18U or later -
Ver. 2.20 or later Ver. 8.23Z or later
The built-in positioning setting was added
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
