Mitsubishi Electric FX3U SERIES - General Specifications; Power Supply Specifications

FX 3S /FX 3G /FX 3GC /FX 3U /FX 3UC PLC User's Manual - Positioning Control Edition
Built-in Positioning Functions
2 Specifications
2.1 General Specifications
B - 17
A
Common Items
B
Built-in Positioning Functions
Apx.
Example Connection
2.1 General Specifications
For the FX 3S /FX 3G /FX 3GC /FX 3U /FX 3UC PLC general specifications, refer to the Hardware Edition manual of
each PLC. Note that the high-speed output special adapter general specifications are the same as the PLC
excluding the specifications shown in the following table.
2.2 Power Supply Specifications
For the FX 3S /FX 3G /FX 3GC /FX 3U /FX 3UC PLC power supply specifications, refer to the Hardware Edition manual
of each PLC
. The power supply specifications of the high-speed output special adapter are shown in the
following table.
Item Specifications
Withstand voltage 500V AC, for 1 minute
Between output terminal of high-speed output
special adapter and grounding terminal of PLC.
Insulation resistance
5M  or more using 500V DC
insulation tester
Item Specifications
Output circuit drive
power supply
24V DC, 60 mA
The service power of the main unit is supplied internally.
Adapter drive power
supply
5V DC, 30 mA
The adapter driver power is internally supplied from the 5V DC power supply unit of the
main unit.
Downloaded from ManualsNet.com search engine