FX
3S
/FX
3G
/FX
3GC
/FX
3U
/FX
3UC
PLC User's Manual - Positioning Control Edition
Built-in Positioning Functions
2 Specifications
2.5 Output Specifications
B - 36
1. Sink internal output circuit
*1. To ground the unit, refer to the servo amplifier (drive unit) manual. If the grounding method is not
specified, carry out class-D grounding.
2. Source internal output circuit
*2. To ground the unit, refer to the servo amplifier (drive unit) manual. If the grounding method is not
specified, carry out class-D grounding.
*3. For MELSERVO Series amplifiers, use a sink output type FX
3U Series main unit.
FX
3U
Series
main unit
Grounding
*1
Servo amplifier
(Drive unit)
5 to 24V DC
Pulse train signal
Direction signal
Y000
COM1
Y004
COM2
FX3U Series
main unit
Grounding
*2
*3
Servo amplifier
(Drive unit)
5 to 24V DC
Pulse train signal
Direction signal
+V1
Y004
+V0
Y000
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
