Mitsubishi Electric LX-100TD-909 User Manual

TENSION DETECTORS
MODEL
LX-005TD, LX-015TD, LX-030TD, LX-050TD, LX-100TD, LX-200TD,
LX-005TD-909, LX-015TD-909, LX-030TD-909, LX-050TD-909,
LX-100TD-909, LX-200TD-909
INSTRUCTION MANUAL
 Read through this manual, and use the unit correctly.
Make sure to understand “Cautions on safety” completely.
 Store this manual carefully, and make sure to send it to the end user.
 2010 MITSUBISHI ELECTRIC CORPORATION
This manual confers no industrial property rights or any rights of any other kind, nor does it confer
any patent licenses.
Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial
property rights which may occur as a result of using the contents noted in this manual.

Mitsubishi Electric LX-100TD-909 Specifications

General

Category	Security Sensors
Detection Method	Passive Infrared
Operating Temperature	-20°C to +50°C
Detection Range	12m x 12m
Operating Voltage	9-16 VDC
Current Consumption	25mA
Humidity Range	95% RH max.

Summary

1. Caution on Safety

Safety Level Definitions

Defines WARNING and CAUTION levels for safety precautions in the manual.

Critical Safety Instructions

Details essential safety measures for installation and operation to prevent hazards.

Manufacturer Responsibility Disclaimer

States limitations of liability for issues arising from unauthorized modifications or repairs.

2. Summary of Tension Detector

Detector Functionality and Installation Example

Explains the detector's capability to measure load and illustrates a typical installation setup.

3. Installation of Tension Detector

3.1 Installing Cautions

Provides critical warnings and precautions to be observed during the installation process.

3.2 Mounting Procedures

Details the correct methods and considerations for physically mounting the tension detector.

4. Wiring Procedure

4.1 Wiring Cautions

Highlights essential safety warnings to follow during the wiring process.

4.2 Detector and Controller Connection

Explains how to connect the tension detector to the control unit, including wiring details.

5. Operation

5.1 Operation Cautions

Lists important safety precautions to be taken during the operation of the tension detector.

6. Specifications

7. Outside Dimensions

7.1 Dimensions for Models LX-005TD to LX-050TD

Provides detailed physical dimensions and mounting hole information for specific tension detector models.

7.2 Dimensions for Models LX-100TD and LX-200TD

Presents detailed physical dimensions and mounting hole information for higher capacity tension detector models.