Need help?Do you have a question about the Mitsubishi Electric M80 Series and is the answer not in the manual?
General| Power Supply | 24 VDC |
|---|---|
| Touchscreen Type | Resistive |
| Interface | USB, Ethernet |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10 to 90% RH (non-condensing) |
Covers various types of alarms encountered, including operation errors, stop codes, servo/spindle alarms, MCP alarms, system alarms, and program errors.
Details various user parameters, including machining parameters, control parameters, I/O parameters, and Ethernet parameters.
Explains servo alarms, their display format, alarm numbers, messages, reset methods, and resetting methods.
Details initial parameter errors, including illegal setting data, incorrect constants, and missing servo options.
Lists errors related to safety functions, such as STO signal input during servo ON/OFF and mismatched signal inputs.
Details parameters related to servo control, including gear ratios, position loop gains, speed loop gains, and various compensation settings.
Covers parameters related to safety functions for individual axes, such as disabling smart safety observation, safe stop methods, and speed tolerances.
To Next Page
