M800VS/M80V Series Connection and Setup Manual
5 Installation
5.3 Unit Installation
207
IB-1501613-A
5.3.7 Machine Operation Panel
Mount the machine operation panel (main panel and sub panel) with the prescribed number of fixing screws.
(1) Refer to "4.14 Machine Operation Panel" for the panel cut dimension drawing and screw hole positions.
[Front mounting]
Fixing screw: Cheese head screw M3 (4 pieces)
(Fixing screws are provided with the unit.)
[Rear mounting]
Fixture: M3 nut (4 pieces)
(4 screw caps (a) provided with the unit.)
FCU8-KB921/KB922/KB923/KB924/KB925/KB926
Note
(a)
To Next Page
Loading...
