M800VS/M80V Series Connection and Setup Manual
35 Data Backup and Restoration
35.1 All Backup
577
IB-1501613-A
35.1 All Backup
The following explains the procedure to backup the various NC data to the memory card in a batch.
(1) APLC data can be backed up only when the APLC release specification is valid.
Operation procedure
(1)
Press the menu [Backup]. The all backup screen is displayed.
<Note>
Press to cancel this process.
(2)
Press [Y], [y] or [INPUT]. The backup starts.
"Executing" and "*" are displayed for the state of file under
processing.
<Note>
If any NC data files already exist in the backup folder, the
confirmation message "Overwrite this file? (Y/N)" will dis-
play. Press [Y], [y] or [INPUT] to start the backup.
When tool data is being sorted, the operation message
"File access error" is displayed and the backup cannot
be executed.
For the custom data, the backup cannot be canceled
during its execution.
To Next Page
Loading...
