Mitsubishi Electric MELDAS MDS-R Series - Appendix 4-5-4 Servo;Spindle Motor Feedback Cable

Appendix 4. EMC Installation Guidelines
A4 - 7
Appendix 4-5-4 Servo/spindle motor feedback cable
Use a shield pair cable for feed back cable of the servo motor to earth on NC side (inside the control
panel.) Mounting a ferrite core directly behind the unit connector is also effective in suppressing noise.
Control panel
To drive unit
Cannon connector
Batch shield pair cable
Feed back cable for servomotor
Downloaded from ManualsNet.com search engine