Mitsubishi Electric MELFA RV-7FRL-D - Page 19

2Unpacking to Installation
Confirming the product 2-7
RV-7FR series
1 Robot arm RV-7FR series Either 1
unit
2 Installation bolts Ｍ8 x 40 4 pcs. For robot arm installation
3 Spring washer for installation bolts For M8 4 pcs.
4 Plain washer for installation bolts For M8 4 pcs.
5 Grease nipple WA-610 4 pcs.
6 Coupling front side φ4 4 pcs.
Supplied for the following internal wiring
and piping specification.
-SH01
7 Coupling back side φ4 4 pcs.
8Air hose φ4 4 pcs.
9 Coupling front side φ4 2 pcs.
Supplied for the following internal wiring
and piping specification.
-SH04, -SH05
10 Coupling back side φ4 2 pcs.
11 Air hose φ4 2 pcs.
12 Ferrite core E04SR301334 1 pc.
Supplied for the following internal wiring
and piping specification.
-SH02, -SH03, -SH04
13 Transporting jig 2 sets
14 Transporting jig installation bolt Ｍ8 x 25 4 pcs.
15 Plain washer for suspension fitting installa
-
tion bolt
For M8 4 pcs.
16 Eye bolt M10 4 pcs.
17 Nut for eye bolt For M10 4 pcs.
18 Fixing plate 1 set
19 Fixing plate installation bolt Ｍ15 x 12 4 pcs.
20 Plain washer for fixing plate For M5 4 pcs.
21 Base internal wiring and piping set 1F-HA01S-01 1 pc.
Pre-installed on the following internal
wiring and piping specification.
-SH02, -SH04, -SH05
22 Base internal wiring and piping set 1F-HA02S-01 1 pc.
Pre-installed on the following internal
wiring and piping specification.
-SH03
No. Part name Type Qty. Remarks