Need help?Do you have a question about the Mitsubishi Electric MELPRO COC4 -A02S1 and is the answer not in the manual?
General| Manufacturer | Mitsubishi Electric |
|---|---|
| Coil Voltage | 24VDC |
| Ambient Temperature | -40°C to +70°C |
| Category | Relays |
| Contact Rating | 5A at 250VAC / 30VDC |
| Electrical Life | 100, 000 operations |
| Insulation Resistance | 1000 MΩ min. at 500VDC |
| Dielectric Strength | 2000VAC |
| Vibration Resistance | 10 to 55 Hz, 1.5mm double amplitude |
Defines situations where moderate/minor injuries or property damage may occur.
Risks of electric shock, injury, or malfunction if handled by unqualified personnel.
Highlights fine setting, 16 operation time characteristics, fault record, and Modbus interface.
Detailed specifications for the CBV2-A02S1 model, including rating, elements, and output contacts.
Detailed specifications for the COC4-A02S1 model, including rating, elements, and output contacts.
Describes how to display real-time voltage or current values using the MEASURE function.
Guides on how to input the password to enter the setting mode when password protection is enabled.
Explains how to set numerical values for relay elements using Switch-4.
Explains how to set or change the password for protected operations.
To Next Page