Mitsubishi Electric Melsec A Series - Page 14

1. INTRODUCTION
-------------------- MELSEC·A
(5) Cable connection between modules
Cables designed exclusively for
the A2C or twisted-pair shield cables I
are used for connection between the A2C and the A2CI/O module and
between the A2CI/O modules.
When the I/O modules are arranged side by side
A2CI/O module
A2C
0
-
0
--
l
I
\
Cable
When the I/O modules are arranged apart I
A2C
A2CI/O module A2CI/O module
0
-
-
0
A2CI/O module
/
Twisted-pair cable
Fig. 1.4 Connection of the A2C System
1-6
•